

29.08.2020
0.74_1: PTT delayed for audio TX buffer size used in the Windows sound routines.
0.74_1: PTT initialized to "OFF" during TNC setup.
0.74_2: PTT initialized as soon as PTT COM port is opened.
0.74_2: New config file item [PROGRAM] SMALLSIZE:, if set to 1, WinRPR starts "shrinked"

30.08.2020
0.750:	DCD indication ("DCD", green, right of the "Terminal Input" label) implemented
        Only visible if DCD is "active".
0.750:  DCD for parallel FSK300 decoder implemented (first simple version, can be improved, state: "ToDo")
0.750:	RPR RX sensitivity improved (multiscan)
0.750:  [PROGRAM] WATERFALL:2 implemented: none-inverted BW 
0.750:  Preventing AutoSizing of Forms / Items of the GUI by Windows (seems to be an issue on Win7)
0.750:  If hardware ports (Audio RX/TX, PTT, COM-OUT) defined in config file cannot be opened, WinRPR will show warnings in "Terminal Output" Window

31.08.2020
0.751   TX-Delay issue fixed (was much too long on FSK300 and also partially corrupted on the other modes)
0.751   Full version number displayed on splash screen.
0.752   WARNING messages regarding hardware ports were partially wrong.


