private:greenmeadow:allstar
This is an old revision of the document!
←.
Allstar Config
echolink.conf
[el0] call = MB7AZE-L ; Change this! pwd = oldtrout ; Change this! name = John ; Change this! qth = allstar 481481 ; Change this! email = gm4slv@gm4slv.plus.com ; Change this! node = 879598 ; Change this! ; Data for EchoLink Status Page lat = 60.2883 ; Latitude in decimal degrees lon = -001.42533 ; Longitude in decimal degrees freq = 430.050 ; not mandatory Frequency in MHz tone = 0.0 ; not mandatory CTCSS Tone (0 for none) power = 1 ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts) height = 0 ; 0=10 1=20 2=40 3=80 4=160 5=320 6=640 7=1280 8=2560 9=5120 (AMSL in Feet) gain = 0 ; Gain in db (0-9) dir = 0 ; 0=omni 1=45deg 2=90deg 3=135deg 4=180deg 5=225deg 6=270deg 7=315deg 8=360deg (Direction) maxstns = 5 ; Max Stations rtcptimeout = 10 recfile = /tmp/echolink_recorded.gsm ; astnode = 481481 ; Change this! context = radio-secure ; Default in code is echolink-in ; Max 3 servers server1 = nasouth.echolink.org server2 = naeast.echolink.org server3 = server3.echolink.org ; To deny w6xxx you would add the statement: deny = w6xxx ; To prohibit computer-based connections you would write: permit = *-* ; To allow access to only a select group of callsigns: permit = w6abc,w6def,... ; permit ; comma delimited list of callsign, type (-r) ; deny ; Remote text commands thru netcat: ; o.conip <IPaddress> (request a connect) ; o.dconip <IPaddress> (request a disconnect) ; o.rec (turn on/off recording) ; ipaddr ; port
Page Info
Page created Sun May 29 15:48:50 2022 by John Pumford-Green
Page last updated: 30/12/25 09:55 GMT
private/greenmeadow/allstar.1653836726.txt.gz · Last modified: (external edit)