MB7AZE AllStar - Make It Tea

Try to learn something about everything, and everything about somethingThomas Huxley “Darwin's bulldog” (1824-1895)

Trace: • Allstar & Echolink • YaDDNet : New VPS • YaDDNet : Running Costs

You are here: Home » Public Area » Radio » Radio Topics » AllStar Linking » MB7AZE AllStar

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<-[[.:start]]




--- //John Pumford-Green 24/04/23 15:05//

**MB7AZE** is now QRT and the NoV has expired. 

I may run AllStar at times from a personal node/gateway [[gm4slv_allstar|]]


The following is for historical interest only....

----
====== MB7AZE AllStar ======


|Platform|Rapsberry Pi|
|Connectivity|[[Allstar|All Star Node 481481]]|
|Interface|CM108 Soundcard|
|Radio|FT-8900|
|Frequency|430.050MHz|
|Monitor|[[http://gm4slv.plus.com:42111/allmon2/link.php?nodes=481481|Allmon2]]|

[[https://ukrepeater.net/my_repeater.php?id=4823|NoV issued April 2022]]


===== Commands =====

  * DTMF Commands
  * Please send * 7 3 to ensure all links are disconnected before making any new links

^Command	^DTMF Sequence^
|Disconect from Node xxxx	|  * 1 xxxx  |
|Connect RX Only to xxxx	|  * 2 xxxx  |
|Connect Transceive to xxxx	|  * 3 xxxx  |
|Speak the Node Status	|  * 7 0  |
|Disconnect ALL nodes	|  * 7 3  |
|Reconnect ALL nodes	|  * 7 4  |
|Send Node ID	|  * 8 0  |
|Speak the Local Time	|  * 8 1  |
|Parrot ON	|  * 9 1  |
|Parrot OFF	|  * 9 2  |
|Parrot ONCE	|  * 9 3  |


^  Number  ^  Name  ^* 5 Macro shortcut to...	^  DTMF Sequence  ^  Node No.  ^
|  1  |  Fedihams | Connect RX Only to Fedihams |  * 5 2 1  |  57881 |
|  1  |  Fedihams | Connect Transceive to Fedihams |  * 5 3 1  |  57881 |
|  1  |  Fedihams | Disconnect from Fedihams |  * 5 1 1  |  57881 |
|  2  |  Hubnet  |Connect RX Only to Hubnet	|  * 5 2 2  |  41223  |
|  2  |  Hubnet  |Connect Transceive to Hubnet	|  * 5 3 2  |  41223  |
|  2  |  Hubnet  |Disconnect from Hubnet	|  * 5 1 2  |  41223  |


===== Courtesy Tones =====


Can give information about the node status.

After a local Transmission on the "input" frequency the reponse will be one of:

  * Morse Letter **I** (di-dit) = node is not connected to any other nodes
  * Morse Letter **R** (di-dah-dit) = node is connected in "Monitor/RX only" mode to one or more nodes
  * Morse Letter **K** (dah-di-dah) = node is connected in "Transceive" mode to one or more nodes

There are other tones, e.g. when a station on a linked node unkeys there's a low-pitched "bloop"

When a local RF station sends a command there's a "bip bip" (not to be confused with the Morse letter I)


===== Echolink =====

AllStar nodes can also connect to [[https://www.echolink.org/logins.jsp|Echolink]]

The node is connected to Echolink as ''MB7AZE-L #879598''


/*
(**UPDATE** --- //John Pumford-Green 01/06/22 17:21// )

I have disabled the Echolink connection by editing ''/etc/asterisk/modules.conf'' to change the channel driver for Echolink to ''noload'' ->

<code conf>
noload => chan_echolink.so ;
</code>

an Asterisk reload is necessary:

<code bash>
gm4slv@mb7aze:/etc/asterisk$ sudo astres.sh
Restarting Asterisk
systemctl restart asterisk.service
</code>

*/


Page created Sun May 29 12:18:09 2022 by John Pumford-Green

Page last updated: ~~LASTMOD~~

{{tag>pi radio allstar mb7aze}}

Navigation

Search

Toolbox