Icom IC-R75 - John's Vademecum

Try to learn something about everything, and everything about somethingThomas Huxley “Darwin's bulldog” (1824-1895)
Trace: • QSO Logging • HF APRS Mobile/Portable • Java JRE and Echolink Proxy • Rig and Key List • Allstar Revisited • Pencils • 4m FM • DBUS & Automount • Getting back into radio • Damasko DA36
You are here: Home » Public Area » Miscellany » Radio » Rig and Key List » Icom IC-R75
This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<-[[.:start]]


====== Icom IC-R75 ======

=====  Details =====


=====  Repairs / Mods =====

  * -5V DC/DC converter
    * various capacitor failures

  * "Turn Off" fault - due to overheating of 13V regulator
    * Cured by 
      * Reduce input voltage to 13.8V
      * Improve heatsinking of regulator IC to chassis

=====  Remote Control =====

{{ :public:radio:radio_database:netradio.png?direct&400 |}}


  * connected to ''shack'' server via RS232
  * ''shack'' server running Python netradio ''server.py'' to give TCP/IP network control
  * ''laptop'' PC running Python netradio ''client.py'' to give user access
    * Available controls: <code>gm4slv@laptop:~/Python/PythonProjects/netradio $ python2 client.py
There are currently 1 radios connected.
=================================
Status of Radio 1 (IC-R75)

Frequency : 391.000 kHz
Mode: CW
S-Meter: -113.0dBm
1 : 0
=================================

Please choose a radio

There are currently 1 radios connected.
Radio 1 is IC-R75
Choose a radio number from the list : 1

The available commands are:
lr   : List Radios
sr   : Select the Radio to control
gr   : Get currently selected Radio name
gm   : Get Mode
sm   : Set Mode
gf   : Get Freq
sf   : Set Freq
gs   : Get S-meter
gp   : Get Pre-amp
pon  : Set Pre-amp On
poff : Set Pre-amp Off
gatt : Get Attn
aton : Set Attn On
atoff: Set Attn Off
ga   : Get All (status of all radios)
sync : Sync freq/mode on two radios
log  : Setup background logging to file
h    : Help (show this command list)
q    : quit

IC-R75 >
</code> 
  * audio via network using ''PicoPhone''
    * running on shack ''laptop'' via ''Wine''
    * running on Windows laptop //natively//

Remote control is achieved via a SSH connection to shack ''laptop'' to run the netradio ''client.py'' and the RX audio can be heard via PicoPhone.


===== Documentation =====

  * {{ :public:radio:radio_database:icr75_instructionmanual.pdf |}}
  * {{ :public:radio:radio_database:icom_ic_r75_service_manual.pdf |}}



=====  Further Reading =====

  * Python code for the remote control at ''github'' [[https://github.com/gm4slv/netradio]]

==== server.py ====

++++ Code.... |

<code python>
#from aor import *
from icom import *
from conf import *
#from m710 import *
import SocketServer
import time

try:
    import readline
except:
    pass

lock = threading.Lock()

radios = []


#r1 = m710(n4)
#radios.append(n4)

r1 = Icom(n1, a1, cal1)
radios.append(n1)

#r2 = Icom(n2, a2, cal2)
#radios.append(n2)

#r3 = Ar7030(n3)
#radios.append(n3)

print radios
print r1.digi_off()

def list_radios():
    radiolist = ""
    for n in range(0, len(radios)):
        r = radios[n]
        radiolist += (r + " ")
    return radiolist


def write_file(text):
    filename = 'commandlog.txt'
    f = open(filename, 'a+')  # a+ is "append to file, create it if it doesn't exist"
    timenow = time.strftime("%d/%m/%Y %H:%M:%S", time.gmtime(time.time()))
    log = " ".join((timenow, text))  # make an entry for the log by joining the timestamp with the text passed in
    f.write(log)
    f.close()


def write_con(text):
    filename = 'conlog.txt'
    f = open(filename, 'a+')  # a+ is "append to file, create it if it doesn't exist"
    timenow = time.strftime("%d/%m/%Y %H:%M:%S", time.gmtime(time.time()))
    log = " ".join((timenow, text))  # make an entry for the log by joining the timestamp with the text passed in
    f.write(log)
    f.close()


# The Server
class ThreadedRequestHandler(SocketServer.StreamRequestHandler):
    def handle(self):
        # we find the current thread for the client connection just set up, to
        # use in the log file
        cur_thread = threading.currentThread()
        # log the new connection details
        write_con("Connect from %s using %s \n" % ((self.client_address[0]), cur_thread.getName()))
        # print to the server's console the new connection IP address/port
        print self.client_address
        # loop to handle client requests....
        while True:
            # using StreamRequestHandler means our input from the client
            # is  "file-like" and can be read with "file-like" commands
            # we read a line at a time, using readline()
            cmd = self.rfile.readline().lower()
            # to keep things clean, we remove any characters that aren't
            # "printable" simple ASCII
            # these are between 32 and 127 in the ASCII table
            # we look at each character, and then make a new word by
            # .join()ing each accepted character with no space in between
            asccmd = "".join(x for x in cmd if ord(x) < 128 and ord(x) > 31)
            # we make a list called "words" holding the received words which
            # will be inspected by various functions
            words = asccmd.split()
            # If a client uses sock.close() itself, to disconnect, it appears that
            # we read a continuous stream of "" on the dead
            # socket, which puts CPU to 100%.
            #
            # The "While" loop is probably responsible, but I can't see another
            # way to keep the connection up for multiple commands.
            #
            # Further connection are accepted due to the Threaded nature of the server.
            # The CPU load is unacceptable though
            # HACK ?>>>>>
            # Looking for "" and then breaking
            # the connection from the server end (even though the client has
            # gone) cures this.
            if cmd == "":
                break
            else:
                pass
            # if the words list is empty, go back and get more input
            if not words:
                continue
            # we have input....
            # filter based on the first word - these are the
            # pre-set commands the server will accept
            # the client wants to know the currently available
            # radio names - held in the variable "rnames"
            elif words[0] == "getnames":
                self.wfile.write(rnames)
            # words[-1] (the last word in the list) will always be the
            # radio name. We give the variable "my_radio" this value, for
            # identifying which radio object to apply the method to
            elif words[0] == "getmode":
                my_radio = eval(words[-1])
                mode = my_radio.get_mode()
                self.wfile.write(mode)
            elif words[0] == "getfreq":
                my_radio = eval(words[-1])
                freq = words[1]
                freq = my_radio.get_freq()
                self.wfile.write(freq)
            elif words[0] == "setmode":
                my_radio = eval(words[-1])
                mode = words[1]
                newmode = my_radio.set_mode(mode)
                self.wfile.write(newmode)
            elif words[0] == "setfreq":
                my_radio = eval(words[-1])
                freq = float(words[1])
                newfreq = my_radio.set_freq(freq)
                self.wfile.write(newfreq)
            elif words[0] == "getsmeter":
                my_radio = eval(words[-1])
                smeter = round(float(my_radio.get_smeter()), 1)
                self.wfile.write(smeter)
            elif words[0] == "gets":
                my_radio = eval(words[-1])
                s = my_radio.get_s()
                self.wfile.write(s)
            elif words[0] == "listradios":
                radios = list_radios()
                self.wfile.write(radios)
            elif words[0] == "getpreamp":
                my_radio = eval(words[-1])
                preamp = my_radio.get_pre()
                self.wfile.write(preamp)
            elif words[0] == "preampon":
                my_radio = eval(words[-1])
                preamp = my_radio.pre_on()
                self.wfile.write(preamp)
            elif words[0] == "preampoff":
                my_radio = eval(words[-1])
                preamp = my_radio.pre_off()
                self.wfile.write(preamp)
            elif words[0] == "getatt":
                my_radio = eval(words[-1])
                att = my_radio.get_att()
                self.wfile.write(att)
            elif words[0] == "atton":
                my_radio = eval(words[-1])
                att = my_radio.att_on()
                self.wfile.write(att)
            elif words[0] == "attoff":
                my_radio = eval(words[-1])
                att = my_radio.att_off()
                self.wfile.write(att)
            elif words[0] == "tune":
                my_radio = eval(words[-1])
                tune = my_radio.tune()
                self.wfile.write(tune)
            elif words[0] == "getpwr":
                my_radio = eval(words[-1])
                pwr = my_radio.get_pwr()
                self.wfile.write(pwr)
            elif words[0] == "setpwr":
                my_radio = eval(words[-1])
                spwr = words[1]
                pwr = my_radio.set_pwr(spwr)
                self.wfile.write(pwr)
            elif words[0] == "quit":
                write_con("Got quit from {}\n".format(self.client_address[0]))  # log it
                self.wfile.write("Goodbye! \r\n")  # say Goodbye
                break
            else:  # nothing in words[0] matches a pre-set command....
                write_file("Received %s\n" % words)  # log it, it's unusual
                self.wfile.write("Command not recognized\r\n")  # inform the client


class ThreadedIcomServer(SocketServer.ThreadingMixIn, SocketServer.TCPServer):
    pass


if __name__ == '__main__':
    # define the lock to be used on the serial port access
    lock = threading.Lock()

    # address ('' = all available interfaces) to listen on, and port number
    address = ('', 9999)
    server = ThreadedIcomServer(address, ThreadedRequestHandler)
    server.allow_reuse_address = True

    # define that the server will be threaded, and will serve "forever" ie. not quit after the client disconnects
    t = threading.Thread(target=server.serve_forever)
    # start the server thread
    t.start()

    write_con(
        "Server loop running in thread: %s\n" % "".join(t.getName())) 
</code>

++++
==== icom.py ====

++++ Code ... |

<code python>
import serial
import threading
from conf import *
import time
#sport = "COM1"
sport = "/dev/ttyS0"
sbaud = 9600

lock = threading.Lock()


class Icom(object):
    def __init__(self, model, radio_address, cal):
        self.ser = serial.Serial(sport, sbaud, timeout=0.1)
        self.model = model
        self.radio_address = radio_address
        self.cal = cal
    
    def digi_off(self):
        sendStr = preamble + preamble + self.radio_address + controller + digi_off_cmd + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Success"
        elif result[4] == nak:
            return "NAK received"

    def get_pre(self):
        sendStr = preamble + preamble + self.radio_address + controller + set_pre_cmd + eom

        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        if result[6] == "\x00":
            return 0
        elif result[6] == "\x01":
            return 1

    def get_pwr(self):
        sendStr = preamble + preamble + self.radio_address + controller + pwr_cmd + eom
        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        p1 = ord(result[7]) / 16
        p2 = ord(result[7]) % 16
        p3 = ord(result[6]) / 16
        p4 = ord(result[6]) % 16
        pwr = float(100 * (10 * p3 + p4) + (10 * p1 + p2))
        return int(pwr*100/255)

    def set_pwr(self, pwr):
        #if pwr == "25":
        #    spwr = "\x00" + "\x63"
        #elif pwr == "50":
        #    spwr = "\x01" + "\x27"
        #elif pwr == "75":
        #    spwr = "\x01" + "\x91"
        #elif pwr == "100":
        #    spwr = "\x02" + "\x55"
        rigpwr = int(pwr) * 255 / 100
        print "rigpwr ", rigpwr
        pwr1 = rigpwr / 100
        pwr2 = rigpwr % 100
        spwr1 = (pwr1 / 10 * 16)
        spwr2 = (pwr1 % 10)
        spwr3 =  (pwr2 / 10 * 16)
        spwr4 =  (pwr2 % 10)
        spwr = chr(spwr1+spwr2) + chr(spwr3+spwr4)
        #print "spwr ", spwr
        sendStr = preamble + preamble + self.radio_address + controller + pwr_cmd + spwr + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return self.get_pwr()
        elif result[4] == nak:
            return "NAK received"

    def pre_on(self):
        sendStr = preamble + preamble + self.radio_address + controller + set_pre_cmd + set_pre_on + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Success"
        elif result[4] == nak:
            return "NAK received"

    def pre_off(self):
        sendStr = preamble + preamble + self.radio_address + controller + set_pre_cmd + set_pre_off + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Success"
        elif result[4] == nak:
            return "NAK received"

    def ptt_on(self):
        sendStr = preamble + preamble + self.radio_address + controller + ptt_on_cmd + eom
        result = self.tx_rx(sendStr)
        #print result[5]
        if not result[4] == ack:
            return "ptt on"
        elif result[4] == nak:
            return "Error"
    
    def ptt_off(self):
        sendStr = preamble + preamble + self.radio_address + controller + ptt_off_cmd + eom
        result = self.tx_rx(sendStr)
        #print result[5]
        if not result[4] == ack:
            return "ptt off"
        elif result[4] == nak:
            return "Error"

    def get_att(self):
        sendStr = preamble + preamble + self.radio_address + controller + set_att_cmd + eom
        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        if result[5] == "\x00":
            return 0
        elif result[5] == "\x20":
            return 1

    def att_on(self):
        sendStr = preamble + preamble + self.radio_address + controller + set_att_cmd + set_att_on + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Success"
        elif result[4] == nak:
            return "NAK received"

    def att_off(self):
        sendStr = preamble + preamble + self.radio_address + controller + set_att_cmd + set_att_off + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Success"
        elif result[4] == nak:
            return "NAK received"

    def set_freq(self, freq):
        fdig = "%010d" % int(freq * 1000)
        bcd = ()
        for i in (8, 6, 4, 2, 0):
            bcd += self.freq_bcd(int(fdig[i]), int(fdig[i + 1]))
        set_freq_val = ""
        for byte in bcd:
            set_freq_val += chr(byte)
        sendStr = preamble + preamble + self.radio_address + controller + set_freq_cmd + set_freq_val + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Set Freq success"
        elif result[4] == nak:
            return "NAK received / Freq not supported"

    def get_freq(self):
        sendStr = preamble + preamble + self.radio_address + controller + get_freq_cmd + eom
        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        if len(result) > 0:
            f = 0
        for k in [18, 19, 16, 17, 14, 15, 12, 13, 11, 10]:
            f = 10 * f + self.nib(result, k)
        self.freq = (float(f) / 1000)
        return "%.3f" % self.freq

    def set_mode(self, mode):
        print "in set_mode() with ", mode
        if mode == "lsb":
            set_mode_val = "\x00"
        elif mode == "usb":
            set_mode_val = "\x01"
        elif mode == "am":
            set_mode_val = "\x02"
        elif mode == "cw":
            set_mode_val = "\x03"
        elif mode == "rtty":
            set_mode_val = "\x04"
        elif mode == "fm":
            set_mode_val = "\x05"
        elif mode == "cw-r":
            set_mode_val = "\x07"
        elif mode == "rtty-r":
            set_mode_val = "\x08"
        elif mode == "s-am":
            set_mode_val = "\x11"
        else:
            return "Mode not recognized"
        sendStr = preamble + preamble + self.radio_address + controller + set_mode_cmd + set_mode_val + eom
        result = self.tx_rx(sendStr)
        if result[4] == ack:
            return "Set Mode Success"
        elif result[4] == nak:
            return "NAK received / Mode not supported"

    def get_mode(self):
        sendStr = preamble + preamble + self.radio_address + controller + get_mode_cmd + eom
        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        mode = ""
        if result[5] == "\x00":
            mode = "lsb"
        elif result[5] == "\x01":
            mode = "usb"
        elif result[5] == "\x02":
            mode = "am"
        elif result[5] == "\x03":
            mode = "cw"
        elif result[5] == "\x04":
            mode = "rtty"
        elif result[5] == "\x05":
            mode = "fm"
        elif result[5] == "\x08":
            mode = "rtty-r"
        elif result[5] == "\x07":
            mode = "cw-r"
        elif result[5] == "\x11":
            mode = "s-am"
        self.mode = mode
        return self.mode.upper()

    def get_s(self):
        sendStr = preamble + preamble + self.radio_address + controller + get_smeter_cmd + eom
        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        sm1 = ord(result[7]) / 16
        sm2 = ord(result[7]) % 16
        sm3 = ord(result[6]) / 16
        sm4 = ord(result[6]) % 16
        s = float(100 * (10 * sm3 + sm4) + (10 * sm1 + sm2))
        return s
    
    def get_swr(self):
        sendStr = preamble + preamble + self.radio_address + controller + get_swr_cmd + eom
        result = self.tx_rx(sendStr)
        if not result:
            return "0"
        sm1 = ord(result[7]) / 16
        sm2 = ord(result[7]) % 16
        sm3 = ord(result[6]) / 16
        sm4 = ord(result[6]) % 16
        swr = float(100 * (10 * sm3 + sm4) + (10 * sm1 + sm2))
        return swr

    def get_smeter(self):
        s = float(self.get_s())
        cal = self.cal
        s1 = s - cal[0]
        s2 = s1 - cal[1]
        s3 = s2 - cal[2]
        s4 = s3 - cal[3]
        s5 = s4 - cal[4]
        s6 = s5 - cal[5]
        s7 = s6 - cal[6]
        if s1 <= 0:
            dbm = -123
            adj = s / cal[0] * 10
            return str(dbm + adj)
        elif s2 <= 0:
            dbm = -113
            adj = s1 / cal[1] * 10
            return str(dbm + adj)
        elif s3 <= 0:
            dbm = -103
            adj = s2 / cal[2] * 10
            return str(dbm + adj)
        elif s4 <= 0:
            dbm = -93
            adj = s3 / cal[3] * 10
            return str(dbm + adj)
        elif s5 <= 0:
            dbm = -83
            adj = s4 / cal[4] * 10
            return str(dbm + adj)
        elif s6 <= 0:
            dbm = -73
            adj = s5 / cal[5] * 10
            return str(dbm + adj)
        elif s7 <= 0:
            dbm = -63
            adj = s6 / cal[6] * 20
            return str(dbm + adj)
        else:
            dbm = -43
            adj = s7 / cal[7] * 20
            return str(dbm + adj)

    def get_name(self):
        return self.model

    def tune(self):
        print "tuning"
        curmode = self.get_mode().lower()
        #print "Current Mode ",curmode

        curpwr = self.get_pwr()
        if curpwr < 98:
            curpwr = curpwr + 1

        #print "Current Power ", curpwr
        
        #print "Current percent power ", curpwr
        self.set_mode("rtty")
        self.set_pwr(25)
        #print "Tuning power ", self.get_pwr()
        #print "PTT On"
        self.ptt_on()
        time.sleep(2)
        swr =  self.get_swr()
        #print "SWR :", swr
        time.sleep(1)
        self.ptt_off()
        #print "PTT Off"
        self.set_mode(curmode)
        #print "Mode reset ",self.get_mode()
        self.set_pwr(curpwr)
        print "Tuned : (ref pwr : %s)" % swr
        return "Tuned : (ref pwr : %s)" % swr
        
    def tx_rx(self, sendStr):
        lock.acquire()
        self.ser.write(sendStr)
        echo = self.ser.read(len(sendStr))
        if len(echo) != len(sendStr):
            return "0"
        byte = "0"
        result = ""
        count = 0
        while byte != eom:
            byte = self.ser.read()
            #print "%#02x" % ord(byte)
            result += byte
            count += 1
            if count > 10:
                break
        lock.release()
        #print ""
        return result


    def nib(self, s, i):
        k = ord(s[i / 2])
        if i % 2 == 0:
            k = k >> 4
        return k & 0xf


    def freq_bcd(self, d1, d2):
        return (16 * d1 + d2),

 </code>

++++

==== conf.py ====

++++ Code .... |

<code python>
# header
preamble = "\xfe"
controller = "\xe0"

# commands/requests
set_freq_cmd = "\x05"
set_mode_cmd = "\x06"
get_freq_cmd = "\x03"
get_mode_cmd = "\x04"
get_smeter_cmd = "\x15" + "\x02"
get_swr_cmd = "\x15" + "\x12"
digi_off_cmd = "\x1a" + "\x04" + "\x00" + "\x00"

set_pre_cmd = "\x16" + "\x02"

set_pre_off = "\x00"
set_pre_on = "\x01"

set_att_cmd = "\x11"
set_att_on = "\x20"
set_att_off = "\x00"

ptt_on_cmd = "\x1c" + "\x00" + "\x01"
ptt_off_cmd = "\x1c" + "\x00" + "\x00"

pwr_cmd = "\x14" + "\x0a"

# end of message
eom = "\xfd"

# controller responses
ack = "\xfb"
nak = "\xfa"

a1 = "\x5A"
n1 = "IC-R75"
cal1 = ( 25, 1, 36, 47, 31, 18, 34, 35 )

a2 = "\x5e"
# a2 = "\x01"
n2 = "IC-718"
cal2 = ( 27, 28, 58, 10, 14, 14, 35, 42 )

n3 = "AR7030"

n4 = "IC-M710"
</code>

++++


==== client.py ====

++++ Code .... |

<code python>
__author__ = 'gm4slv'
# client to work with server_oo.py
# 

# # v0.1

import socket

try:
    import readline
except ImportError:
    pass

import threading
import time


HOST, PORT = "shack", 9999

smlog = "pymon.txt"
log_active = []


def make_con():
    global sock
    sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
    sock.connect((HOST, PORT))


def get_rnum():
    global num
    global radios

    names = connect("listradios")

    radios = names.split()
    num = len(radios)
    return num


def get_rname(i):
    r = radios[i]
    return r


def list_radios():
    num = get_rnum()
    global radio
    print "\r\nThere are currently %d radios connected." % num
    for i in range(0, num):
        r = get_rname(i)
        print "Radio %d is %s" % (i + 1, r)


def get_lradio():
    num = get_rnum()

    lradio = raw_input("Select radio to log: ").strip()

    if not lradio:
        print "Please select a radio"
        return False
    elif int(lradio) > num:
        print "Selected radio not recognized"
        return False

    else:

        return lradio


def set_radio():
    num = get_rnum()
    # global radio
    global radio_num
    global rname
    print "There are currently %d radios connected." % num
    for i in range(0, num):
        r = get_rname(i)
        print "Radio %d is %s" % (i + 1, r)

    radio = raw_input("Choose a radio number from the list : ").strip()
    try:
        if not radio:
            print "Please select a radio"
            return False, False

        elif int(radio) > num:
            print "Selected radio not recognized"
            return False, False
    except ValueError:
        print "Please enter a number"
        return False, False

    else:
        radio_num = "".join(("r", radio))
        rname = get_rname(int(radio) - 1)
        return radio_num, rname


def prompt():
    print ""
    print "The available commands are:"
    print "lr   : List Radios"
    print "sr   : Select the Radio to control"
    print "gr   : Get currently selected Radio name"
    print "gm   : Get Mode"
    print "sm   : Set Mode"
    print "gf   : Get Freq"
    print "sf   : Set Freq"
    print "gs   : Get S-meter"
    print "gp   : Get Pre-amp"
    print "pon  : Set Pre-amp On"
    print "poff : Set Pre-amp Off"
    print "gatt : Get Attn"
    print "aton : Set Attn On"
    print "atoff: Set Attn Off"
    print "ga   : Get All (status of all radios)"
    print "sync : Sync freq/mode on two radios"
    print "log  : Setup background logging to file"
    print "h    : Help (show this command list)"
    print "q    : quit"
    print ""


def start():
    global radio_num
    global rname
    global sock

    data = raw_input(rname + " > ").lower().strip()
    if len(data.split()) > 1:
        print "only one command at a time please"
        start()

    elif data == "lr":
        list_radios()
        start()
    elif data == "sr":

        radio_num, rname = set_radio()

        while not radio_num:
            radio_num, rname = set_radio()

        start()

    elif data == "gr":
        print "Radio selected is %s" % rname
        start()

    elif data == "gm":
        mode = connect("getmode" + " " + radio_num)
        print "%s replied: %s" % (rname, mode)
        start()

    elif data == "sm":
        smode = raw_input("Enter mode: ")
        mode = connect("setmode" + " " + smode + " " + radio_num)
        print "%s replied: %s" % (rname, mode)
        start()

    elif data == "gf":
        freq = connect("getfreq" + " " + radio_num)
        print "%s replied: %s kHz" % (rname, freq)
        start()

    elif data == "sf":
        sfreq = raw_input("Enter freq (kHz): ")
        freq = connect("setfreq" + " " + sfreq + " " + radio_num)
        print "%s replied: %s" % (rname, freq)
        start()

    elif data == "gs":
        smeter = connect("getsmeter" + " " + radio_num)
        print "%s replied: %sdBm" % (rname, smeter)
        start()

    elif data == "gp":
        preamp = connect("getpreamp" + " " + radio_num)
        print "%s replied: %s" % (rname, preamp)
        start()

    elif data == "pon":
        preamp = connect("preampon" + " " + radio_num)
        print "%s replied: %s" % (rname, preamp)
        start()

    elif data == "poff":
        preamp = connect("preampoff" + " " + radio_num)
        print "%s replied: %s" % (rname, preamp)
        start()

    elif data == "gatt":
        preamp = connect("getatt" + " " + radio_num)
        print "%s replied: %s" % (rname, preamp)
        start()

    elif data == "aton":
        att = connect("atton" + " " + radio_num)
        print "%s replied: %s" % (rname, att)
        start()

    elif data == "atoff":
        att = connect("attoff" + " " + radio_num)
        print "%s replied: %s" % (rname, att)
        start()

    elif data == "ga":
        get_all()
        start()


    elif data == "log":
        fname = raw_input("Enter a filename (or \"Return\" for default) :")
        if fname == "":
            fname = smlog
        # check file is valid
        try:
            f = open(fname, 'a+')
            f.close()
        except IOError:
            print "File/path not valid"
            start()

        list_radios()

        lradio = get_lradio()

        while not lradio:
            lradio = get_lradio()

        rname = get_rname(int(lradio) - 1)
        if lradio in log_active:
            print "Logging already active on " + rname
        else:
            tlog = int(raw_input("Enter a polling interval (seconds) :"))
            p = threading.Thread(target=log, args=(lradio, tlog, fname))
            p.setDaemon(True)
            p.start()
            log_active.append(lradio)
        start()

    elif data == "sync":
        sync_result = sync()
        print sync_result
        start()


    elif data == "h" or data == "help":
        prompt()
        start()


    elif data == "q" or data == "quit":
        rx = connect("quit")
        print "Server says: %s " % rx

    else:
        prompt()
        start()


def get_all():
    num = get_rnum()
    global radio
    print "There are currently %d radios connected." % num
    print "=" * 33
    for i in range(0, num):
        r = get_rname(i)
        n = "".join(("r", str(i + 1)))
        freq = connect("getfreq" + " " + n)
        mode = connect("getmode" + " " + str(n))
        smeter = connect("getsmeter" + " " + str(n))
        preamp = connect("getpreamp" + " " + str(n))
        att = connect("getatt" + " " + str(n))

        print "Status of Radio %d (%s) \r\n" % (i + 1, r)
        print "Frequency : %s kHz" % freq
        print "Mode: %s" % mode
        print "S-Meter: %sdBm" % smeter
        print "%s : %s " % (preamp, att)
        print "=" * 33

    print ""


def log(p, t, f):
    print "\n\n"
    tlog = t
    sradio = get_rname(int(p) - 1)

    sr = "".join(("r", str(p)))
    while True:
        try:
            frequency = connect("getfreq" + " " + sr + "\n")
            smeter = connect("getsmeter" + " " + sr + "\n")
            mode = connect("getmode" + " " + sr + "\n")
            write_file(f, sradio, mode, frequency, smeter)
            time.sleep(tlog)
        finally:
            pass


def get_mradio():
    num = get_rnum()

    mradio = raw_input("Choose Master radio number from the list: ").strip()

    if not mradio:
        print "Please select a radio"
        return False
    elif int(mradio) > num:
        print "Selected radio not recognized"
        return False

    else:

        return mradio


def get_sradio():
    num = get_rnum()
    sradio = raw_input("Choose Slave radio number from the list: ").strip()

    if not sradio:
        print "Please select a radio"
        return False
    elif int(sradio) > num:
        print "Selected radio not recognized"
        return False

    else:

        return sradio


def sync():
    num = get_rnum()
    print ""
    print "Set SLAVE to the same Frequency and Mode as MASTER.\r\n"
    print "Currently connected radios are:"
    for i in range(0, num):
        r = get_rname(i)
        print "%d is %s" % (i + 1, r)

    mradio = get_mradio()
    while not mradio:
        mradio = get_mradio()

    sradio = get_sradio()
    while not sradio:
        sradio = get_sradio()
    sr = "".join(("r", sradio))
    mr = "".join(("r", mradio))
    mfreq = connect("getfreq" + " " + mr)
    mmode = connect("getmode" + " " + mr)

    sfreq = connect("setfreq" + " " + mfreq + " " + sr)
    smode = connect("setmode" + " " + mmode + " " + sr)

    return (sfreq + "\r\n" + smode + "\r\n")


# Try to send and receive in one-go, to prevent the logging thread and the main prog
# getting the wrong receive data

def connect(data):
    try:
        lock.acquire()
        global sock
        sock.sendall(data + "\n")
        received = sock.recv(2048)
    finally:
        lock.release()

    return received


def write_file(fname, rname, mode, freq, smeter):
    filename = fname
    f = open(filename, 'a+')
    timenow = time.strftime("%d/%m/%Y %H:%M:%S", time.gmtime(time.time()))
    log = " ".join((timenow, rname, mode, freq, smeter, "\r\n"))
    f.write(log)
    f.close()


make_con()

lock = threading.Lock()
get_all()
print "Please choose a radio\r\n"
radio_num, rname = set_radio()
while not radio_num:
    radio_num, rname = set_radio()

prompt()
start()

</code>

++++

==== Page Info ====

Page created Wed May 25 00:06:01 2022 by John Pumford-Green

Page last updated: ~~LASTMOD~~



{{tag>radio icr75}}
Navigation

Search

Toolbox
