Differences

This shows you the differences between two versions of the page.

--- public:radio:svx_mobile [03/12/22 19:45 GMT] – [Start with Reflector ON, Echolink Disabled] john
+++ public:radio:svx_mobile [26/04/23 14:53 BST] (current) – removed john
@@ Line 1: / Line 1: @@
-<-[[.:start]]
-====== Svx Mobile ======
-**Plan...**
-To make a mobile hotspot that will provide access to SVXReflector and Echolink as well as a handy single-frequency parrot repeater.
-===== Hardware =====
-Remains the same as the previous portable hotspot
-  * Raspberry Pi
-  * CM108 soundcard
-  * IC-2E
-  * MiFi router
-It will be installed in my vehicle, which also has a TM-D710 for APRS and voice comms.
-  * <todo>Add 5V regulator to power R.Pi from 12VDC</todo>
-  * <todo>Put everything in a grab-box for portability</todo>
-===== SVXLink Config =====
-  * Echolink Module enabled (switchable via DTMF commands)
-  * Echolink using a [[public:radio:jre_and_echolink_proxy|Private Proxy]] running on my VPS machine to enable incoming connections.
-==== Logic.tcl additions for switching EL on/off ====
-Added to ''<...>/events.d/local/Logic.tcl''
-<code tcl>
- # Example: Custom command executed when DTMF 97 is received
-  if {$cmd == "97"} {
-    puts "Executing external command"
-    playMsg "Core" "online"
-    exec /home/gm4slv/svx_ref_el.sh &
-    return 1
-  }
-  # Example: Custom command executed when DTMF 98 is received
-  if {$cmd == "98"} {
-    puts "Executing external command"
-    playMsg "Core" "online"
-    exec /home/gm4slv/svx_ref_noel.sh &
-    return 1
-  }
-  # Example: Custom command executed when DTMF 99 is received
-  if {$cmd == "99"} {
-    puts "Executing external command"
-    playMsg "Core" "online"
-    exec /home/gm4slv/svx_noref_el.sh &
-    return 1
-  }
-</code>
-  * DTMF command ''97#'' will cause svxlink to restart with **Reflector** connected, **Echolink** connected.
-  * DTMF command ''98#'' will cause svxlink to restart with **Reflector** connected, **Echolink** disabled.
-  * DTMF command ''99#'' will cause svxlink to restart with **Reflector** disabled, **Echolink** connected.
-==== Start with Reflector ON and Echolink ON ====
-''97#''
-<code bash>
-#!/bin/bash
-CFG=/usr/local/etc/svxlink/svxlink_ref_el.conf
-LOG=/home/gm4slv/svxlink.log
-sudo killall svxlink
-sudo killall svxlink
-sudo killall svxlink
-echo "25" > /sys/class/gpio/export
-sleep 2
-echo "out" > /sys/class/gpio/gpio25/direction
-sudo svxlink --daemon --logfile=$LOG --config=$CFG
-exit 0
-</code>
-==== Start with Reflector ON, Echolink Disabled ====
-''98#''
-<code bash>
-#!/bin/bash
-CFG=/usr/local/etc/svxlink/svxlink_ref_noel.conf
-LOG=/home/gm4slv/svxlink.log
-sudo killall svxlink
-sudo killall svxlink
-sudo killall svxlink
-echo "25" > /sys/class/gpio/export
-sleep 2
-echo "out" > /sys/class/gpio/gpio25/direction
-sudo svxlink --daemon --logfile=$LOG --config=$CFG
-exit 0
-</code>
-=== Start with Reflector disabled, Echolink ON ===
-''99#''
-<code bash>
-#!/bin/bash
-CFG=/usr/local/etc/svxlink/svxlink_noref_el.conf
-LOG=/home/gm4slv/svxlink.log
-sudo killall svxlink
-sudo killall svxlink
-sudo killall svxlink
-echo "25" > /sys/class/gpio/export
-sleep 2
-echo "out" > /sys/class/gpio/gpio25/direction
-sudo svxlink --daemon --logfile=$LOG --config=$CFG
-exit 0
-</code>
-It's probable that I'll configure the initial start ''@reboot'' to be //with// Reflector **and** Echolink
-''crontab''  ->  ''@reboot sleep 30 && sudo -u gm4slv /home/gm4slv/svx_ref_el.sh >/dev/null 2>&1''
-Using a PROXY server for connecting to Echolink, and be able to accept incoming Echolink connections, is necessary because it's not possible to control external firewall/port forwarding when using the MiFi 4G router for internet access.
-Connecting ''direct'' to Echolink, without the ''proxy'' still allows outgoing Echolink connections to be made
-Rather than relying on other ''PUBLIC'' Echolink proxies I though it would be wise to install and run a proxy server myself, on the VPS machine. It turned out to be easier than I thought and the basic steps are [[public:radio:jre_and_echolink_proxy| here]]
-===== Parrot =====
-I imagine being able to use the Parrot feature as a temporary single-frequency repeater perhaps for emergency use?
-I'll experiment....
-==== Page Info ====
---- //John Pumford-Green 03/06/22 17:59//
-Page last updated: ~~LASTMOD~~
-{{tag>}}