Differences

This shows you the differences between two versions of the page.

--- public:radio:radio_database:tm-d710 [03/05/24 10:33 BST] – [Service Mode to adjust TX Powers] john
+++ public:radio:radio_database:tm-d710 [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-<-[[.:start]]
-====== Kenwood TM-D710 ======
-==== Service Mode to adjust TX Powers ====
-  * To access Service Mode
-    * Make 6-pin data plug with pins 3 &  6 connected
-    * {{:public:radio:radio_database:710_data.png?300|}}
-    * {{:public:radio:radio_database:img_20230527_214839_993_2.jpg?200|}}
-    * Plug into Data Socket on Main Unit
-    * Power up while holding Left 2 Function buttons
-  * To set powers, rotate main knob to find "HPWR  V" etc.
-    * Note current settings of all 6 parameters
-      * HPWR V 216
-      * MPWR V 148
-      * LPWR V 137
-      * HPWR U 225
-      * MPWR U 106
-      * LPWR U 83
-    * Adjust each to achieve required power (Press PTT, Look at Power meter, rotate Main Knob with relevant figure selected.....)
-      * New settings (high power set to keep current below 10A)
-        * HPWR V 172 -> 25W (current 6.5A)
-        * MPWR V 148 -> 10W
-        * LPWR V 137 = 5W
-        * HPWR U 133 -> 20W
-        * MPWR U 102 -> 10W
-        * LPWR U 83 = 5W
-    * Power off
-    * Remove plug
-    * Power on
-=== See also ===
-  * I found a You Tube video showing the procedure, so I didn't bother making my own!
-    * [[https://youtu.be/7pawM502eas]]
-===== Remote Control and Cross-Band Repeat =====
-See [[public:radio:radio_database:th-d72| TH-D72]]
-===== Documentation =====
-  * {{ :public:radio:radio_database:tm-d710g_all_en.pdf |}}
-==== Page Info ====
-Page created Wed May 25 00:01:05 2022 by John Pumford-Green
-Page last updated: ~~LASTMOD~~
-==== tags ====
-{{tag>radio tmd710}}