John's Vademecum

Try to learn something about everything, and everything about something -Thomas Huxley “Darwin's bulldog” (1824-1895)

User Tools

Site Tools


public:radio:radio_database:th-d72

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
public:radio:radio_database:th-d72 [29/03/24 09:01 GMT] – [Documentation] johnpublic:radio:radio_database:th-d72 [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-<-[[.:start]] 
- 
- 
-====== TH-D72 ====== 
- 
- 
- 
-===== Remote Control ===== 
- 
-The TH-D72 can be used to remotely control a [[public:radio:radio_database:tm-d710| TM-D710]]. This allows remote control of VHF Frequency/Memory Channel, TX power, CTCSS/DCS tones and to enable/disable cross-band repeat. 
- 
-The remote control function uses specific DTMF sequences to instruct the TM-D710.  
- 
-To enable "Remote Ctrl" mode : 
- 
-  - Select the correct UHF uplink frequency to match the TM-D710 
-  - Turn off the TH-D72 
-  - Hold ''MR'' and ''PTT'' 
-  - Turn on the TH-D72 
- 
-The display will show "Mobile Ctrl" 
- 
-  {{:public:radio:radio_database:2024-03-29_08.46.00.jpg?600|}} 
- 
-The TM-D710 must also be put in Remote Control mode. 
- 
-On the TM-D710 
- 
-  * select VHF mode on both sides 
-  * set the left side to the wanted VHF Frequency 
-  * set the right side to the UHF Uplink/control frequency to match the TH-D72 
-  * turn off 
-  * hold ''Rev'' button  
-  * turn on 
- 
-The TM-D710 should now be in remote mode. 
- 
-To restore normal operation repeat the same sequence of  
- 
-  * Turn off 
-  * Hold ''Rev'' 
-  * Turn on 
- 
-Successful commands sent to the TM-D710 will receive a "pip pip pip" revertive. 
- 
-The commands are send using the TH-D72 keypad, remapped as: 
- 
-|1 = DCS On | 2 = Tone On | 3 = CTCSS On | A = Enter | 
-|4 = DCS Off |5 = Tone Off | 6 = CTCSS Off | B = CTCSS/DCS Tone | 
-|7 = Call Ch. Mode |8 = VFO Mode |9 = Memory Mode | C = Repeater On| 
-|* = Down |0 = Power | # = Up |D = Repeater Off | 
- 
- 
- 
-  * to change VHF Frequency to 145.500 
-    * 8 (VFO Mode) 
-    * A (Enter) 145500 A (Enter) 
-  * to change to memory channel 2 
-    * 9 (Memory Mode) 
-    * A (Enter) 002 A (enter) 
-  * To turn on Cross-Band Repeat 
-    * C  
-  * To turn off Cross-Band Repeat 
-    * D 
- 
-===== Documentation ===== 
- 
-  * {{ :public:radio:radio_database:th-d72_all_e.pdf |}} 
-  * {{ :public:radio:radio_database:th-d72ae_idm.pdf |}} 
- 
-==== Page Info ==== 
- 
-Page created Wed May 25 00:01:26 2022 by John Pumford-Green 
- 
-Page last updated: ~~LASTMOD~~ 
- 
-==== tags ==== 
- 
-{{tag>radio th-d72}} 
- 
  
public/radio/radio_database/th-d72.1711702860.txt.gz · Last modified: (external edit)