John's Vademecum

Try to learn something about everything, and everything about something -Thomas Huxley “Darwin's bulldog” (1824-1895)

User Tools

Site Tools


public:radio:radio_database:ic706

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
public:radio:radio_database:ic706 [26/05/23 06:36 BST] – [6m LPF relays] johnpublic:radio:radio_database:ic706 [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-<-[[.:start]] 
- 
- 
-====== IC-706 ====== 
- 
-** Mark 1 - the original "Shack-in-a-box" ** 
- 
-  * HF 100W 
-  * 6m 100W 
-  * 2m 10W 
- 
- 
- 
-===== Background ===== 
- 
-  * From the Silent Key equipment of Peter GM0CXQ 
-   
-==== First impressions ==== 
- 
-    * In poor condition cosmetically, internally and externally 
-    * Intermittent RX performance on several bands, most severely 6m, due to LPF switching relays 
-    * No Power cable 
-      * ordered via eBay 24/5/23 
-    * No microphone 
-      * ordered via eBay 25/5/23 
-    * Not "MARS" modified to give access to 60m  
-===== Initial tests ===== 
- 
-  * Sensitivity ok on all HF bands 
-  * 6m shows intermittent "deafness" after changing bands - LPF relays? 
-  * Initially some higher HF bands also showed slow decrease in sensitivity after a few minutes. After transmitting a few times on each band this tendency stopped - have the LPF relay contacts "wiped" themselves clean by carrying more significant signal current on TX? 
-    * 6m //still// suffers random RF signal loss on RX 
-  * TX power ok on all HF bands, and 6m, with 100W FM carrier at setting "H" 
-  * All controls work correctly 
-  * Fitted FL-233 "Narrow SSB" filter option appears to work (TBC) 
- 
-===== Repairs and Modifications ===== 
- 
-==== 6m LPF relays ==== 
- 
-{{:public:radio:radio_database:img_20230525_191452_339.jpg?400|}} 
- 
- 
-  * To cure signal loss on RF I removed the LPF board and was able to pop the clear plastic tops from the relays used on either side of the 6m LPF section.  
-  * Contacts in RL2 and RL3 cleaned with Contact Cleaner spray, and wiped with paper soaked in cleaner to remove any dirt/contamination build-up. 
- 
- 
-{{:public:radio:radio_database:img_20230525_191942_134.jpg?400|}} 
- 
- 
-  * Caps replaced on relays and LPF board replaced. 
-  * Receive sensitivity now good and does not vary with time, or following band changing. 
-  * The relays used on the other HF bands are of a different (more easily sourced) type and can't be opened in this manner. Fortunately they all seem to be healthy at the moment. 
- 
-==== MARS TX Mod ==== 
- 
-  * To allow use on the 60m band I carried out the simple modification to remove "D59" from the Main PCB, which removes the "TX only in Ham Bands" restriction. 
-  * Radio now transmits across the whole HF band, including 60m 
- 
- 
- 
-===== Further Information ===== 
- 
- 
-  * [[https://groups.io/g/IC706]] 
-  * [[http://www.hampedia.net/icom/ic-706-enables-out-of-band-transmit.php]] 
- 
- 
-{{tag>radio ic706}} 
- 
  
public/radio/radio_database/ic706.1685079400.txt.gz · Last modified: (external edit)