Differences

This shows you the differences between two versions of the page.

--- public:radio:mb7aze_allstar [24/04/23 16:08 BST] – [UPDATE] john
+++ public:radio:mb7aze_allstar [26/04/23 14:46 BST] (current) – removed john
@@ Line 1: / Line 1: @@
-<-[[.:start]]
-===== UPDATE =====
---- //John Pumford-Green 24/04/23 15:05//
-**MB7AZE** is now QRT and the NoV has expired.
-I may run AllStar at times from a personal node/gateway [[public:radio:gm4slv_allstar| GM4SLV AllStar]]
-The following is for historical interest only....
-----
-====== MB7AZE : allstar ======
-|Platform|Rapsberry Pi|
-|Connectivity|[[Allstar|All Star Node 481481]]|
-|Interface|CM108 Soundcard|
-|Radio|FT-8900|
-|Frequency|430.050MHz|
-|Monitor|[[http://gm4slv.plus.com:42111/allmon2/link.php?nodes=481481|Allmon2]]|
-[[https://ukrepeater.net/my_repeater.php?id=4823|NoV issued April 2022]]
-===== Commands =====
-  * DTMF Commands
-  * Please send * 7 3 to ensure all links are disconnected before making any new links
-^Command	^DTMF Sequence^
-|Disconect from Node xxxx	|  * 1 xxxx  |
-|Connect RX Only to xxxx	|  * 2 xxxx  |
-|Connect Transceive to xxxx	|  * 3 xxxx  |
-|Speak the Node Status	|  * 7 0  |
-|Disconnect ALL nodes	|  * 7 3  |
-|Reconnect ALL nodes	|  * 7 4  |
-|Send Node ID	|  * 8 0  |
-|Speak the Local Time	|  * 8 1  |
-|Parrot ON	|  * 9 1  |
-|Parrot OFF	|  * 9 2  |
-|Parrot ONCE	|  * 9 3  |
-^  Number  ^  Name  ^* 5 Macro shortcut to...	^  DTMF Sequence  ^  Node No.  ^
-|  1  |  Fedihams | Connect RX Only to Fedihams |  * 5 2 1  |  57881 |
-|  1  |  Fedihams | Connect Transceive to Fedihams |  * 5 3 1  |  57881 |
-|  1  |  Fedihams | Disconnect from Fedihams |  * 5 1 1  |  57881 |
-|  2  |  Hubnet  |Connect RX Only to Hubnet	|  * 5 2 2  |  41223  |
-|  2  |  Hubnet  |Connect Transceive to Hubnet	|  * 5 3 2  |  41223  |
-|  2  |  Hubnet  |Disconnect from Hubnet	|  * 5 1 2  |  41223  |
-===== Courtesy Tones =====
-Can give information about the node status.
-After a local Transmission on the "input" frequency the reponse will be one of:
-  * Morse Letter **I** (di-dit) = node is not connected to any other nodes
-  * Morse Letter **R** (di-dah-dit) = node is connected in "Monitor/RX only" mode to one or more nodes
-  * Morse Letter **K** (dah-di-dah) = node is connected in "Transceive" mode to one or more nodes
-There are other tones, e.g. when a station on a linked node unkeys there's a low-pitched "bloop"
-When a local RF station sends a command there's a "bip bip" (not to be confused with the Morse letter I)
-===== Echolink =====
-AllStar nodes can also connect to [[https://www.echolink.org/logins.jsp|Echolink]]
-The node is connected to Echolink as ''MB7AZE-L #879598''
-/*
-(**UPDATE** --- //John Pumford-Green 01/06/22 17:21// )
-I have disabled the Echolink connection by editing ''/etc/asterisk/modules.conf'' to change the channel driver for Echolink to ''noload'' ->
-<code conf>
-noload => chan_echolink.so ;
-</code>
-an Asterisk reload is necessary:
-<code bash>
-gm4slv@mb7aze:/etc/asterisk$ sudo astres.sh
-Restarting Asterisk
-systemctl restart asterisk.service
-</code>
-*/
-Page created Sun May 29 12:18:09 2022 by John Pumford-Green
-Page last updated: ~~LASTMOD~~
-{{tag>pi radio allstar mb7aze}}