Differences

This shows you the differences between two versions of the page.

--- public:radio:igate [24/04/23 16:28 BST] – john
+++ public:radio:igate [26/04/23 14:37 BST] (current) – removed john
@@ Line 1: / Line 1: @@
-<-[[.:]]
-====== APRS iGate ======
-|Platform|Raspberry Pi|
-|software|dixprs|
-|Radio Hardware|TM-D710|
-|Frequency|144.800MHz|
-|Callsign|GM4SLV-2|
-===== Software =====
-iGate Software : [[https://thelifeofkenneth.com/aprx/|aprx]]
-Using Linux AX25 network device
-''/etc/ax25/axports''
-<code bash>
-# /etc/ax25/axports
-#
-# The format of this file is:
-#
-# name callsign speed paclen window description
-#
-GM4SLV-2 19200 236 2 VHF APRS (1200 bps)
-</code>
-Everything starts by a script, with options commented out to start [[https://github.com/ha5di/DIXPRS|Dixprs]] instead of ''aprx''
-Dixprs seems to be moribund, the google site where help and information was available is gone. Dixprs works well, and I can switch back to it
-whenever I want to, but ''aprx'' is at least still supported.
-''ax_start.sh''
-<code bash>
-#!/bin/bash
-logger "AX-Start"
-logger "kissattach..."
-sudo /usr/sbin/kissattach /dev/ttyAMA0 1 10.0.0.1
-#kissparms -p 1 -f n -l 50 -r 32 -s 320 -t 400
-logger "kissattach ok"
-logger "ifconfig"
-sudo /sbin/ifconfig ax0 10.0.0.1 netmask 255.255.255.0
-sudo /sbin/ifconfig ax0 hw ax25 GM4SLV up
-logger "ifconfig ok"
-logger "mheardd"
-sudo /usr/sbin/mheardd
-logger "mheard ok"
-logger "ax25d"
-sudo /usr/sbin/ax25d
-logger "ax25d ok"
-#logger "aprx"
-#sudo /sbin/aprx
-#logger "aprx ok"
-screen -c /etc/screenrc -dmS dixprs /usr/local/dixprs/dixprs.py -c /usr/local/dixprs/config.txt
-#sleep 10
-#screen -S dixprs -x -X screen bash -c 'python /home/gm4slv/selcall.py; exec bash'
-</code>
-Aprx Config file :
-<code bash>
-#############################################################
-#
-#
-mycall  GM4SLV-2
-myloc lat 6017.31N lon 00125.51W
-<aprsis>
-#passcode 21424
-passcode 19626
-server   euro.aprs2.net
-#server 192.168.21.101 2023
-#filter "b/GM4WMM*"
-#filter "b/G0RAS*"
-#filter "b/G8YPK*"
-#filter "t/*"
-#filter "-t/t"
-#filter "-b/KE8TCB-*"
-#filter "-b/ASHIE*"
-#filter "r/60.2885/-1.4252/80"
-#filter "b/GM4SLV-13"
-#filter "b/OM6ZB-7"
-#filter "b/KD7LMN"
-#filter "-b/GW4AMZ*"
-#filter "b/GM4SLV*"
-filter "m/150"
-</aprsis>
-<logging>
-pidfile /var/run/aprx.pid
-rflog /var/log/aprx/aprx-rf.log
-aprxlog /var/log/aprx/aprx.log
-</logging>
-<interface>
-ax25-device $mycall
-tx-ok true
-</interface>
-#<interface>
-#serial-device /dev/ttyAMA0 19200 8n1 KISS
-#tx-ok true
-#</interface>
-<beacon>
-beaconmode radio
-cycle-size  30m
-#beacon dstcall BEACON interface $mycall via WIDE1-1 exec /usr/bin/uptime
-beacon interface $mycall via WIDE1-1  symbol "/-" $myloc comment "APRX - R.Pi/TNC-Pi"
-#beacon interface $mycall via WIDE1-1  symbol "/-" $myloc comment "VHF 144.800MHz"
-#beacon interface $mycall via WIDE1-1 raw ">VHF 144.8MHz"
-</beacon>
-#<beacon>
-#beaconmode radio
-#cycle-size 60m
-#beacon via WIDE1-1 object "GB3LU" symbol "/r" lat "6008.57N" lon "00112.29W" comment "145.675MHz T077 -060 Shetland Isles"
-#beacon via WIDE1-1 object "GB3LER" symbol "/r" lat "6008.57N" lon "00112.29W" comment "50.064MHz *** Faulty *** OFF AIR *** Shetland Isles"
-#</beacon>
-<beacon>
-beaconmode aprsis
-cycle-size  60m
-beacon dstcall BEACON exec /usr/bin/uptime
-beacon  symbol "/-" $myloc comment "APRX - R.Pi/TNC-Pi"
-#beacon raw ">VHF 144.8MHz"
-#beacon  object "GB3LU" symbol "/r" lat "6008.57N" lon "00112.29W" comment "145.675MHz T077 -060 Shetland Isles"
-#beacon  object "GB3LER" symbol "/r" lat "6008.57N" lon "00112.29W" comment "50.064MHz ***OFF AIR*** Shetland Isles"
-</beacon>
-<digipeater>
-    transmitter     $mycall
-    <source>
-        source         $mycall
-	filter "-t/t"
-	filter "t/*"
-    </source>
-<source>
-   source        APRSIS
-   relay-type    third-party
-   viscous-delay  5
-#   ratelimit      10 20
-   via-path  WIDE2-2
-   msg-path  WIDE2-2
-   filter "-t/t"
-   filter "t/*"
-   regex-filter data ISBeacon
-#   filter "b/GM4SLV-13"
-#   filter "b/OM6ZB-7"
-#   filter "b/GM4WMM*"
-</source>
-</digipeater>
-</code>
-===== Hardware =====
-I use a [[https://tnc-x.com/TNCPi.htm|TNC-Pi]] attached via the GPIO serial port connections. Something had to be done
-to stop the serial port having a Linux Console attached, in the boot configuration, but it's been many years and I
-can't remember the details.
-At present the Radio in use is a simple FT-60R handheld, at 5W output.
-===== See Also =====
-The iGate appears on [[https://aprs.fi/info/a/GM4SLV-2|aprs.fi]] as GM4SLV-2.
-Part of the [[public:radio:pi|]]
- //[[gm4slv@gm4slv.plus.com|John Pumford-Green]] Wed May  4 10:33:37 2022//
-Page Updated : ~~LASTMOD~~
-{{tag>radio pi aprs linux}}