Differences

This shows you the differences between two versions of the page.

--- public:radio:dormant:aprs [31/05/25 12:09 BST] – [Update May 2025] john
+++ public:radio:dormant:aprs [31/05/25 12:12 BST] (current) – john
@@ Line 32: / Line 32: @@
 ++++ Dixprs installation |
-<code>
 Installation
 Preparation
@@ Line 92: / Line 91: @@
+++++
+++++ an ax_start.sh with the dixprs screen command |
+<code bash>
+#!/bin/bash
+logger "AX-Start"
+logger "kissattach..."
+sudo /usr/sbin/kissattach /dev/ttyAMA0 1 10.0.0.1
+#kissparms -p 1 -f n -l 50 -r 32 -s 320 -t 400
+logger "kissattach ok"
+logger "ifconfig"
+sudo /sbin/ifconfig ax0 10.0.0.1 netmask 255.255.255.0
+sudo /sbin/ifconfig ax0 hw ax25 GM4SLV up
+logger "ifconfig ok"
+logger "mheardd"
+sudo /usr/sbin/mheardd
+logger "mheard ok"
+logger "ax25d"
+sudo /usr/sbin/ax25d
+logger "ax25d ok"
+#logger "aprx"
+#sudo /sbin/aprx
+#logger "aprx ok"
+screen -c /etc/screenrc -dmS dixprs /usr/local/dixprs/dixprs.py -c /usr/local/dixprs/config.txt
+#sleep 10
+#screen -S dixprs -x -X screen bash -c 'python /home/gm4slv/selcall.py; exec bash'
 </code>
-++++
+++++
 The software is still available on github [[https://github.com/ha5di/DIXPRS]]