Differences

This shows you the differences between two versions of the page.

--- public:radio:allstar:allstar_nxdn [10/06/25 18:43 BST] – john
+++ public:radio:allstar:allstar_nxdn [10/06/25 18:54 BST] (current) – [The main Things] john
@@ Line 43: / Line 43: @@
 <code ini>
 [USRP]
-address = 127.0.0.1                     ; IP address of USRP partner (Analog_Reflector, Allstar/Asterisk or another Analog_Bridge)
+address = 127.0.0.1           ; IP address of USRP partner (Analog_Reflector, Allstar/Asterisk or another Analog_Bridge)
-txPort = 31001                          ; Transmit USRP frames on this port
+txPort = 31001                ; Transmit USRP frames on this port
-rxPort = 34001                          ; Listen for USRP frames on this port
+rxPort = 34001                ; Listen for USRP frames on this port
 </code>
@@ Line 147: / Line 147: @@
   * A workaround is to put "insecure" in root's ~/.curlrc
-<code>
+<code bash>
-sudo su -
-echo insecure >> ~/.curlrc
+gm4slv@node481482:~$ sudo su -
-/opt/MMDVM_Bridge/dvswitch.sh update
+root@node481482:~# echo insecure >> ~/.curlrc
+root@node481482:~# /opt/MMDVM_Bridge/dvswitch.sh update
 </code>
+++++ DVSwitch.ini |
 ===== DVSwitch.ini =====
@@ Line 260: / Line 263: @@
 </code>
+++++
+++++ MMDVM_Bridge.ini |
 ===== MMDVM_Bridge.ini =====
@@ Line 383: / Line 390: @@
 GatewayPort=14020
 </code>
+++++
+++++ NXDNGateway.ini |
 ===== NXDNGateway.ini =====
@@ Line 465: / Line 476: @@
 Enable=1
 Port=6075
 </code>
+++++
+++++ Analog_Bridge.ini |
 ===== Analog_Bridge.ini =====
@@ Line 576: / Line 590: @@
 </code>
+++++