Differences

This shows you the differences between two versions of the page.

--- public:radio:allstar:allstar_nodes_built [10/06/25 21:48 BST] – old revision restored (10/06/25 21:47 BST) john
+++ public:radio:allstar:allstar_nodes_built [19/06/25 10:19 BST] (current) – [DMR Bridging Node] john
@@ Line 8: / Line 8: @@
 |Platform| Raspberry Pi 2 Model B Rev 1.1 |
+|OS| Raspbian GNU/Linux 10 (buster) |
+|ASL Version | 2.0.0-beta.6 |
 |Interface|CM108 Soundcard - modified|
 |Radio|FT-1500M @ 5W|
-|Frequency|144.900MHz|
+|Frequency|144.9125MHz / CTCSS : 77.0Hz|
 |Allstar Node | [[http://stats.allstarlink.org/stats/481480 | 481480]] |
 |Echolink | GM4SLV-L : 886089 |
-|Dashboard| http://gm4slv.plus.com:42110/|
+|Dashboard| [[http://gm4slv.plus.com:42111/ |via 481481's Allmon3]]  |
 The initial node, described here -> [[gm4slv_allstar_2025|]] got too cumbersome after adding DMR Bridging, along with handling Echolink.
@@ Line 20: / Line 22: @@
 I removed the DVSwitch bridging from the VHF Gateway node and changed its node ID to ''481480'' (NNX)
 ==== Echolink Config ====
@@ Line 82: / Line 86: @@
 ===== DMR Bridging Node =====
-|Platform | Raspberry Pi 3 Model B Rev 1.2 |
+|Platform | Raspberry Pi 4 Model B Rev 1.5 |
+|OS |Debian GNU/Linux 12 (bookworm) |
+|ASL Version |3.7.1-1.deb |
 |Allstar Node | [[http://stats.allstarlink.org/stats/481481 | 481481]] |
 |Dashboard| http://gm4slv.plus.com:42111/|
+<note>
+New hardware and OS install
+Installed OS first Pi OS 64 bit Lite ->
+[[https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-64-bit |Pi OS Lite]]
+then the ASL repository and finally ASL3 and Allmon3 following guide at:
+[[https://allstarlink.github.io/install/debian/install/]]
+I found this much nicer than the "Pi Appliance" method.
+</note>
 This one is for running DVSwitch to bridge to (at the moment) TGIF TG23544<color red>29</color> (my so-called //ID Talkgroup// )
-I added the DVSwitch software, in the same way described here [[gm4slv_allstar_2025|]] and decided to bridge to ''TGIF'' instead of Brandmeister.
+I added the DVSwitch software, in the same way described here [[gm4slv_allstar_2025|]] (using ''bookworm'' in place of ''buster'') and decided to bridge to ''TGIF'' instead of Brandmeister.
@@ Line 318: / Line 339: @@
   * See [[Test_Node]]
-|Platform | Raspberry Pi 2 Model B Rev 1.1 |
-|Allstar Node | [[http://stats.allstarlink.org/stats/481481 | 481482 ]] |
-|Dashboard| http://gm4slv.plus.com:42112/|
-This one is to use for tests and experiments....
-<note>
-Experiment 1
-Friday 6th June 2025
-Make a 2nd DMR Bridge to monitor DVSPh TG733 "MilNet"
-</note>
-  * Made a new private node ''1398''
-  * Connect ''481482'' to internal private ''1398''
-  * Set up DVSwitch MMDVM_Bridge & Analog_Bridge
-    * MMDVM set to use Hotspot ID ''235442998''
-    * Options=StartRef=4000;RelinkTime=0;UserLink=0;TS1_1=733;
-  * Connected MMDVM_Bridge to DVS_Ph F server - linked to TG733
-  * Main VHF Gateway Node ''481481'' connected to Test Node ''481482'' in "Monitor" mode.
-<note>
-Experiment 2
-Saturday 7th June 2025
-Change this DMR bridge to TGIF TG23544<color red>35</color>
-This is the ID Talkgroup for my 2<sup>nd</sup> DMR ID
-</note>
-  * MMDVM_Bridge set to connect to TGIF, using my <color red>alternative</color> DMR ID, as hotspot ''235443598''
-    * this requires the correct User Security passphrase for ''2354435''
-  * Also confirmed operation with MMDVM_Bridge connecting as //normal// ''235442998'' (my "usual" DMR ID with SSID=98)
-  * Analog_Bridge set to use TG23544<color red>__35__</color>
-<note>
-Experiment 3
-Monday 9th June
-Change this DMR bridge to Brandmeister TG23551
-This is the ''Scottish Multi-protocol'' Talkgroup
-[[https://dmrscotland.wordpress.com/scot-multi/]]
-</note>
-<note>
-Experiment 4
-Monday 9th June
-Change this to NXDN Bridge to TG23551
-[[http://nxdnscotland.ddns.net/]]
-</note>
-=== NXDN Bridging ===
-See : [[Allstar_NXDN]]
-FIXME