John's Vademecum

Try to learn something about everything, and everything about something -Thomas Huxley “Darwin's bulldog” (1824-1895)

User Tools

Site Tools

You are here: My digital Commonplace Book » Public Area » 01 : Radio » AllStar Linking » The Nodes
Trace: • NXDN Bridging • Mini Igate • Hints & Tips • DM15L Startup Keys & Serial Console • Orphans & Wanted • Information • 01 : Radio
public:radio:allstar:allstar_nodes_built

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
public:radio:allstar:allstar_nodes_built [10/06/25 21:48 BST] – [Test Node] johnpublic:radio:allstar:allstar_nodes_built [19/06/25 10:19 BST] (current) – [DMR Bridging Node] john
Line 8: Line 8:
  
 |Platform| Raspberry Pi 2 Model B Rev 1.1 | |Platform| Raspberry Pi 2 Model B Rev 1.1 |
 +|OS| Raspbian GNU/Linux 10 (buster) |
 +|ASL Version | 2.0.0-beta.6 |
 |Interface|CM108 Soundcard - modified| |Interface|CM108 Soundcard - modified|
 |Radio|FT-1500M @ 5W| |Radio|FT-1500M @ 5W|
-|Frequency|144.900MHz|+|Frequency|144.9125MHz / CTCSS : 77.0Hz|
 |Allstar Node | [[http://stats.allstarlink.org/stats/481480 | 481480]] | |Allstar Node | [[http://stats.allstarlink.org/stats/481480 | 481480]] |
 |Echolink | GM4SLV-L : 886089 | |Echolink | GM4SLV-L : 886089 |
-|Dashboard| http://gm4slv.plus.com:42110/|+|Dashboard| [[http://gm4slv.plus.com:42111/ |via 481481's Allmon3]]  |
  
 The initial node, described here -> [[gm4slv_allstar_2025|]] got too cumbersome after adding DMR Bridging, along with handling Echolink. The initial node, described here -> [[gm4slv_allstar_2025|]] got too cumbersome after adding DMR Bridging, along with handling Echolink.
Line 20: Line 22:
  
 I removed the DVSwitch bridging from the VHF Gateway node and changed its node ID to ''481480'' (NNX) I removed the DVSwitch bridging from the VHF Gateway node and changed its node ID to ''481480'' (NNX)
 +
 +
  
 ==== Echolink Config ==== ==== Echolink Config ====
Line 82: Line 86:
 ===== DMR Bridging Node ===== ===== DMR Bridging Node =====
  
-|Platform | Raspberry Pi 3 Model B Rev 1.2 |+|Platform | Raspberry Pi 4 Model B Rev 1.5 | 
 +|OS |Debian GNU/Linux 12 (bookworm) | 
 +|ASL Version |3.7.1-1.deb |
 |Allstar Node | [[http://stats.allstarlink.org/stats/481481 | 481481]] | |Allstar Node | [[http://stats.allstarlink.org/stats/481481 | 481481]] |
 |Dashboard| http://gm4slv.plus.com:42111/| |Dashboard| http://gm4slv.plus.com:42111/|
 +
 +<note>
 +New hardware and OS install
 +
 +Installed OS first Pi OS 64 bit Lite ->
 +
 +[[https://www.raspberrypi.com/software/operating-systems/#raspberry-pi-os-64-bit |Pi OS Lite]]
 +
 +then the ASL repository and finally ASL3 and Allmon3 following guide at:
 +
 +[[https://allstarlink.github.io/install/debian/install/]]
 +
 +I found this much nicer than the "Pi Appliance" method.
 +
 +</note>  
  
 This one is for running DVSwitch to bridge to (at the moment) TGIF TG23544<color red>29</color> (my so-called //ID Talkgroup// ) This one is for running DVSwitch to bridge to (at the moment) TGIF TG23544<color red>29</color> (my so-called //ID Talkgroup// )
  
-I added the DVSwitch software, in the same way described here [[gm4slv_allstar_2025|]] and decided to bridge to ''TGIF'' instead of Brandmeister.+I added the DVSwitch software, in the same way described here [[gm4slv_allstar_2025|]] (using ''bookworm'' in place of ''buster'') and decided to bridge to ''TGIF'' instead of Brandmeister.
  
  
Line 312: Line 333:
  
 FIXME FIXME
 +
 +
 +===== Test Node =====
 +
 +  * See [[Test_Node]]
 +
 +
  
  
public/radio/allstar/allstar_nodes_built.1749588521.txt.gz · Last modified: by john