Differences

This shows you the differences between two versions of the page.

--- public:radio:allstar:allstar_dmr [10/06/25 21:43 BST] – [The main Things] john
+++ public:radio:allstar:allstar_dmr [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
@@ Line 1: / Line 1: @@
-<-[[.:start]]
-====== DMR Bridging ======
-** First try at DVSwitch Bridging **
-FIXME
-===== Overview of IP UDP ports =====
-<code>
-    Asterisk              Analog_Bridge         DVSwitch
-    ========              =============         MMDVM_Bridge
-                                                ============
-    [node]                [USPR]
-    rxPort 31001 <------- txPort 31001
-    txPort 34001 -------> rxPort 34001
-                             ↓ ↑
-                          [md380-emu]:2470
-                             ↓ ↑
-                          [AMBE]                [DMR]
-                          txPort 31103 ------>  rxPort 31103
-                          rxPort 31100 <------  txPort 31100
-                                                   ↓  ↑
-                                                [DMR Network]
-                                                Host : xx.xx.xx.xx
-                                                Port : xxxxxx
-</code>
-===== The main Things =====
-  * Make sure ''Analog_Bridge.ini'' has the correct txPort and rxPort in its [USRP] section
-<code ini>
-[USRP]
-address = 127.0.0.1           ; IP address of USRP partner (Analog_Reflector, Allstar/Asterisk or another Analog_Bridge)
-txPort = 31001                ; Transmit USRP frames on this port
-rxPort = 34001                ; Listen for USRP frames on this port
-</code>
-  * It should match Asterisk's private node as defined in ''/etc/asterisk/rpt.conf'' - in this case it's [1398]
-<code ini>
-[1398]
-rxchannel = USRP/127.0.0.1:34001:31001 ; Use the USRP channel driver. Must be enabled in modules.conf
- ; 127.0.0.1 = IP of the target application
- ; 34001 = UDP port the target application is listening on
- ; 32001 = UDP port ASL is listening on
-</code>
-  * Make Sure ''Analog_Bridge.ini'' has the correct txPort and rxPort in its [AMBE] section
-<code ini>
-[AMBE_AUDIO]
-address = 127.0.0.1                     ; IP address of xx_Bridge
-; For DMR  - match the ports set in DVSwitch.ini
-txPort = 31103                          ; Transmit TLV frames to partner on this port
-rxPort = 31100                          ; Listen for TLV frames from partner on this port
-; FOr NXDN - match the ports set in DVSwitch.ini
-;txPort = 33103                          ; Transmit TLV frames to partner on this port
-;rxPort = 33100                          ; Listen for TLV frames from partner on this port
-ambeMode = DMR                          ; DMR, DMR_IPSC, DSTAR, NXDN, P25, YSFN, YSFW (encode PCM to this format)
-</code>
-  * should match the ports in ''DVSwitch.ini'' [DMR] section
-<code ini>
-; Configure the DMR Partner
-; Audio format is AMBE 72 bit
-[DMR]
-address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
-txPort = 31100                  ; Port to send AMBE TLV frames to (export)
-rxPort = 31103                  ; Port to listen on (import)
-</code>
-  * Enable [DMR] in ''MMDVM_Bridge.ini''
-<code ini>
-[DMR]
-Enable=1
-ColorCode=1
-EmbeddedLCOnly=1
-DumpTAData=0
-</code>
-  * Enable [DMR Network] in ''MMDVM_Bridge.ini'' anc choose the DMR Network, password, port
-<code ini>
-[DMR Network]
-Enable=1
-; TGIF
-Address=tgif.network
-Port=62031
-;TGIF Password for 2354435
-;Password=XXXXXXXXXXX
-; TGIF Password for 2354429
-Password=XXXXXXXXXX
-; Brandmeister
-;Address=2341.master.brandmeister.network
-;Password=XXXXXXXXXX
-;Port=62031
-Jitter=750
-Local=62032
-; FOR DVS_Ph F
-;Address=78.129.135.43
-;Port=55555
-;Password=PASSWORD
-;Options=StartRef=4000;RelinkTime=0;UserLink=0;TS1_1=733;
-Slot1=0
-Slot2=1
-Debug=0
-</code>
-  * Select hotspot ID-SSID and DMR ID, plus choice of Talkgroup in ''Analog_Bridge.ini''
-<code ini>
-; The metadata below is used when ASL is the source since it does not have any concept of digital modes
-gatewayDmrId = 2354429                  ; ID to use when transmitting from Analog_Bridge 7 digit ID
-repeaterID = 235442998                  ; ID of source repeater 7 digit ID plus 2 digit SSID
-; Talkgroup needed for DMR and NXDN.
-; NXDNGateway uses Talkgroup to choose the reflector IP/Port from its Host Files
-txTg = 2354429                        ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
-txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
-colorCode = 1                           ; Color Code to assign DMR frames
-</code>
-==== Updating DVSwitch Hostfiles =====
-  * DVSwtich keep its hostfiles in ''/var/lib/mmdvm'' and updates via ''cron.daily/DVSM_Update'' which calls ''/opt/MMDVM_Bridge/dvswitch.sh update''
-  * This tries to download hostfiles from various places using ''curl''
-  * It seems to fail most of the time due to a SSL problem
-  * A workaround is to put "insecure" in root's ~/.curlrc
-<code>
-sudo su -
-echo insecure >> ~/.curlrc
-/opt/MMDVM_Bridge/dvswitch.sh update
-</code>
-===== Section Two =====
---- //John Pumford-Green 10/06/25 08:55 BST//
-===== Further Information =====
-{{tag>radio AllStar dvswitch dmr}}