Differences

This shows you the differences between two versions of the page.

--- public:radio:allstar:allstar_dmr [10/06/25 21:41 BST] – [The main Things] john
+++ public:radio:allstar:allstar_dmr [11/06/25 11:32 BST] (current) – john
@@ Line 53: / Line 53: @@
-  * Make Sure ''Analog_Bridge.ini'' has the correct txPort and rxPort in its [AMBE] section
+  * Make Sure ''Analog_Bridge.ini'' has the correct txPort and rxPort in its [AMBE_AUDIO] section
 <code ini>
@@ Line 92: / Line 92: @@
 </code>
-  * Enable [DMR Network] in ''MMDVM_Bridge.ini'' anc choose the DMR Network, password, port
+  * Enable [DMR Network] in ''MMDVM_Bridge.ini'' and choose the DMR Network, password, port
 <code ini>
@@ Line 126: / Line 126: @@
 </code>
+  * Select hotspot/repeater source ID&SSID (repeaterID=235442998) and your DMR ID (gatewayDmrId = 2354429), plus choice of Talkgroup in ''Analog_Bridge.ini''
+<code ini>
+; The metadata below is used when ASL is the source since it does not have any concept of digital modes
+gatewayDmrId = 2354429                  ; ID to use when transmitting from Analog_Bridge 7 digit ID
+repeaterID = 235442998                  ; ID of source repeater 7 digit ID plus 2 digit SSID
+; Talkgroup needed for DMR and NXDN.
+; NXDNGateway uses Talkgroup to choose the reflector IP/Port from its Host Files
+txTg = 2354429                        ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
+txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
+colorCode = 1                           ; Color Code to assign DMR frames
+</code>
 ==== Updating DVSwitch Hostfiles =====