Differences

This shows you the differences between two versions of the page.

--- public:radio:allstar:allstar_dmr [10/06/25 21:37 BST] – [Overview of IP UDP ports] john
+++ public:radio:allstar:allstar_dmr [11/06/25 11:32 BST] (current) – john
@@ Line 53: / Line 53: @@
-  * Make Sure ''Analog_Bridge.ini'' has the correct txPort and rxPort in its [AMBE] section
+  * Make Sure ''Analog_Bridge.ini'' has the correct txPort and rxPort in its [AMBE_AUDIO] section
 <code ini>
@@ Line 72: / Line 72: @@
   * should match the ports in ''DVSwitch.ini'' [DMR] section
-FIXME
+<code ini>
+; Configure the DMR Partner
+; Audio format is AMBE 72 bit
+[DMR]
+address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
+txPort = 31100                  ; Port to send AMBE TLV frames to (export)
+rxPort = 31103                  ; Port to listen on (import)
+</code>
   * Enable [DMR] in ''MMDVM_Bridge.ini''
@@ Line 82: / Line 90: @@
 EmbeddedLCOnly=1
 DumpTAData=0
+</code>
+  * Enable [DMR Network] in ''MMDVM_Bridge.ini'' and choose the DMR Network, password, port
+<code ini>
+[DMR Network]
+Enable=1
+; TGIF
+Address=tgif.network
+Port=62031
+;TGIF Password for 2354435
+;Password=XXXXXXXXXXX
+; TGIF Password for 2354429
+Password=XXXXXXXXXX
+; Brandmeister
+;Address=2341.master.brandmeister.network
+;Password=XXXXXXXXXX
+;Port=62031
+Jitter=750
+Local=62032
+; FOR DVS_Ph F
+;Address=78.129.135.43
+;Port=55555
+;Password=PASSWORD
+;Options=StartRef=4000;RelinkTime=0;UserLink=0;TS1_1=733;
+Slot1=0
+Slot2=1
+Debug=0
+</code>
+  * Select hotspot/repeater source ID&SSID (repeaterID=235442998) and your DMR ID (gatewayDmrId = 2354429), plus choice of Talkgroup in ''Analog_Bridge.ini''
+<code ini>
+; The metadata below is used when ASL is the source since it does not have any concept of digital modes
+gatewayDmrId = 2354429                  ; ID to use when transmitting from Analog_Bridge 7 digit ID
+repeaterID = 235442998                  ; ID of source repeater 7 digit ID plus 2 digit SSID
+; Talkgroup needed for DMR and NXDN.
+; NXDNGateway uses Talkgroup to choose the reflector IP/Port from its Host Files
+txTg = 2354429                        ; TG to use for all frames sent from Analog_Bridge -> xx_Bridge
+txTs = 2                                ; Slot to use for frames sent from Analog_Bridge -> xx_Bridge
+colorCode = 1                           ; Color Code to assign DMR frames
 </code>