Differences

This shows you the differences between two versions of the page.

--- public:radio:2024:hf-vhf_xgate [29/03/24 14:40 GMT] – [Mobile Cross-band repeat access] john
+++ public:radio:2024:hf-vhf_xgate [06/03/25 06:49 GMT] (current) – external edit 127.0.0.1
@@ Line 206: / Line 206: @@
 I've updated the ''mercurial repository'' - added new files, committed recent changes and made a clone of it on the shack laptop - in Dropbox (which might be a bad idea?)
-There's another page about [[public:linux:mercurial| simple Mercurial]] , as an aid to remembering how to do it each time.
+There's another page about [[public:computers:mercurial| simple Mercurial]] , as an aid to remembering how to do it each time.
 |24/3/24 |{{ :public:radio:2024:xgate_m710.zip |}} |Xgate scripts |
@@ Line 258: / Line 258: @@
 After a timeout it's a simple matter of logging in again via VHF DTMF and re-starting talkthrough if it's still required. The "warning pips" give notice that this action is soon to be needed. If talkthrough is no longer needed then no further action is required.
+=== Ideas ===
+Make the Watchdog timer user switchable - be able to disable it if required.
+  * Added new DTMF Commands "Timeout on" = ''* 3 1 #'', "Timeout off" = ''* 3 0 #''
+  * Use these to write to the "status" file
+  * The watchdog process can check the status file to decide whether to take action or not
+  * Tested and it works as expected
+=== Problems ===
+/3/24
+  * Found that the IC-M710 HF radio has poor receive sensitivity - well below spec. 12dB SINAD should be at 0.5uV but it needs more like 3uV (or more) which is quite poor
+  * X-Gate taken out of use until I can either repair the ''IC-M710'' or make up connections to use the ''IC-7200''. The latter needs a 13-pin DIN plug for the rear panel ACC socket.