Differences

This shows you the differences between two versions of the page.

--- private:greenmeadow:allstar [29/05/22 16:08 BST] – [echolink.conf] gm4slv
+++ private:greenmeadow:allstar [29/05/22 16:29 BST] (current) – removed gm4slv
@@ Line 1: / Line 1: @@
-<-[[.:start]]
-====== Allstar Config ======
-=== echolink.conf ===
-++++ /etc/asterisk/echolink.conf |
-<code>
-[el0]
-call = MB7AZE-L                          ; Change this!
-pwd = oldtrout                           ; Change this!
-name = John                        ; Change this!
-qth = allstar 481481                           ; Change this!
-email = gm4slv@gm4slv.plus.com                         ; Change this!
-node = 879598                           ; Change this!
-; Data for EchoLink Status Page
-lat = 60.2883                               ; Latitude in decimal degrees
-lon = -001.42533                               ; Longitude in decimal degrees
-freq = 430.050                              ; not mandatory Frequency in MHz
-tone = 0.0                              ; not mandatory CTCSS Tone (0 for none)
-power = 1                               ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts)
-height = 0                              ; 0=10 1=20 2=40 3=80 4=160 5=320 6=640 7=1280 8=2560 9=5120 (AMSL in Feet)
-gain = 0                                ; Gain in db (0-9)
-dir = 0                                 ; 0=omni 1=45deg 2=90deg 3=135deg 4=180deg 5=225deg 6=270deg 7=315deg 8=360deg (Direction)
-maxstns = 5                            ; Max Stations
-rtcptimeout = 10
-recfile = /tmp/echolink_recorded.gsm    ;
-astnode = 481481             ; Change this!
-context = radio-secure                  ; Default in code is echolink-in
-; Max 3 servers
-server1 = nasouth.echolink.org
-server2 = naeast.echolink.org
-server3 = server3.echolink.org
-; To deny w6xxx you would add the statement: deny = w6xxx
-; To prohibit computer-based connections you would write: permit = *-*
-; To allow access to only a select group of callsigns: permit = w6abc,w6def,...
-; permit                                ; comma delimited list of callsign, type (-r)
-; deny
-; Remote text commands thru netcat:
-; o.conip <IPaddress>    (request a connect)
-; o.dconip <IPaddress>   (request a disconnect)
-; o.rec                  (turn on/off recording)
-; ipaddr
-; port
-</code>
-++++
-=== manager.conf ===
-++++ /etc/asterisk/manager.conf |
-<code>
-;
-; Asterisk Call Management support
-;
-; By default asterisk will listen on localhost only.
-[general]
-enabled = yes
-port = 5038
-bindaddr = 127.0.0.1
-[gm4slv]
-secret = llcgi
-read = all,system,call,log,verbose,command,agent,user,config
-write = all,system,call,log,verbose,command,agent,user,config
-</code>
-++++
-==== Page Info ====
-Page created Sun May 29 15:48:50 2022 by John Pumford-Green
-Page last updated: ~~LASTMOD~~
-{{tag>}}